Configure the fit
Telescopic sections allow both height and width adjustment so the rack can be set up around compatible ute tub dimensions and equipment.
-
files/10019_4WD.png
-
files/10042.jpg
-
files/10040_4WD.png
-
files/10031_4WD.jpg
-
files/10030_4WD.jpg
-
files/10032_4WD.jpg
-
files/10033_4WD.jpg
-
files/10036_4WD.jpg
-
files/10037_4WD.jpg
-
files/10034_4WD.png
-
files/10035_4WD.png
AdjustableHeight configuration
AdjustableWidth configuration
T-slotAccessory-ready rails
660 lbClaimed load capacity
OPENROAD 4WD ute tub rack
Build above the tub. Pack more into every trip.
Create a configurable platform for rooftop tents, recovery boards and long touring gear while keeping the ute tub available below. Adjustable height and width help the rack work with a wider range of compatible tub setups.
View purchase options
$559.00 AUD GST included
Made for modular touring
Configure the rack around your vehicle and load
A cleaner way to organise the load
More usable space without giving up the tub.
Use the space above
Carry selected bulky or long equipment above the tub, leaving useful storage space available underneath.
Add accessories your way
T-slot channels provide flexible mounting positions for compatible brackets, tie-downs and touring accessories.
Brace the load path
Four uprights, wide mounting feet, side rails and diagonal bracing form a stable platform when correctly installed.
Designed to adapt
Set the rack around the job.
Keep it lower for a more compact profile or raise the crossbars when your cab, load or accessory setup requires additional clearance.
- Height-adjustable uprightsMultiple mounting positions are visible on each post.
- Telescopic side railsConfigure the rack length to suit a compatible tub.
- Full-width crossbarsCreate a broad platform for compatible cargo and accessories.
From workday to weekend
One rack. Different ways to use it.
Build a setup for touring, camping or carrying long equipment, subject to the vehicle, installation and accessory ratings.
Capacity with context
Rated up to 660 lb.
The supplied product imagery states a 660 lb load capacity, approximately 300 kg. The usable limit of the complete setup is always determined by the lowest-rated component.
Before loading
Check your vehicle, tub, mounting points, rack installation, accessory hardware and load distribution. Dynamic and off-road loads can differ from a stationary load.
Choose the working height
Raise it. Lower it. Match the setup.
Raised positionUseful when additional clearance is required.
Lowered positionA more compact configuration for suitable loads.
Useful details throughout
Built around mounting flexibility.
01
T-slot channelsFlexible mounting positions along the upper rails.
02
End tie-down pointsIntegrated openings at the crossbar ends.
03
Diagonal bracingReinforcement between each upright and mounting foot.
04
Wide base platesMultiple fixing positions are visible at each mounting foot.
Pictured kit
The rack components, laid out clearly.
The supplied image shows the uprights, crossbars, adjustable side rails, mounting plates, brackets and installation hardware. Check the final product listing and instructions before installation.
Check before ordering
Measure the vehicle, not just the idea.
Exact product dimensions and vehicle fitment are not yet listed. Confirm the following points before this product is made available for sale.
01
Tub dimensionsMeasure usable length, width and the required rack height.
02
Mounting surfaceConfirm the tub rail or fitted track can accept the mounting feet.
03
Cab clearanceAllow for body movement, accessories and the intended load.
04
Load limitsCheck vehicle, tub, rack, fastener and accessory ratings.
Frequently asked questions
Plan the setup first.
Is the rack height adjustable?
Yes. Multiple mounting positions are shown on the telescopic uprights, allowing raised and lowered configurations. Exact height ranges have not yet been provided.
Is the rack width adjustable?
Yes. The connecting rails use telescopic sections so the width can be configured for compatible tub layouts. Exact width ranges have not yet been provided.
Can it carry a rooftop tent?
A rooftop tent setup is shown in the supplied imagery. Compatibility depends on the tent mounting system, crossbar spacing, installed rack capacity, vehicle limits and correct load distribution.
What can be mounted to the T-slots?
Compatible brackets, tie-downs and selected touring accessories may be fitted. Confirm the slot profile, fastener size and accessory rating before installation.
Will it fit my ute?
Vehicle-specific fitment has not yet been provided. Measure the tub and mounting surfaces, then compare them with the final product dimensions before ordering.
Australian storeSupport from OPENROAD Australia
Dispatched from VICShipping calculated at checkout
Modular setupHeight, width and accessories can be configured
Fitment firstMeasure the vehicle before ordering
Ready to build your setup?
Put the space above your ute tub to work.
$559.00 AUD GST included
Choose quantity and buy
