TREE TRUNK PROTECTOR PRODUCT OVERVIEW
Use this Tree Trunk Protector Strap to turn any sturdy tree into a safe, non-damaging anchor point for snatch blocks or winch recoveries on your 4WD adventures.
Crafted from 25 mm high-tensile polyester webbing, it offers a 15 000 kg Minimum Breaking Strength and a 5 000 kg Working Load Limit, so you can pull with confidence. Soft, protective inner padding and abrasion-resistant seam sleeves shield bark from cuts and wear, while reinforced folded-eye ends let you clip in your recovery gear in seconds. At just 9.14 m long, it wraps easily around large trunks and rolls up compactly with an integrated Velcro strap—perfect for stowing under your seat or in your recovery kit.
Stay prepared for everything from sandy bogs to rocky outposts, and safeguard the bushland you love.


Features
SPECIFICATIONS
Dimensions: 2.44 m × 100 mm
Colour: Black and Red
Weight: 1.5 kg (3.3 lb)
Thickness: 3.5 mm (0.14 in)Material: Polyester webbing
Minimum Breaking Strength: 18 144 kg (40 000 lb)
Safe Working Load: 9 072 kg (20 000 lb)
Temperature Range: –40 °C to +100 °C


270 AWNING
Shielding you from the sun in summer, and from wind and rain in winter.
You may also like
Tree Trunk Protector FAQs
Have any other questions for Tree Trunk Protector?
Some FAQs are listed here to help you out!
Some FAQs are listed here to help you out!
IF you still have a question, click the button below to contact us.
What is a tree trunk protector?
Can you use tree trunk protector as a snatch?
How to use a tree trunk protector?
What safety tips should I follow when using a tree trunk protector?
What load rating does the tree trunk protector have?
A tree trunk protector is a heavy-duty strap designed to protect trees when using them as an anchor point for winching. Instead of wrapping a winch cable directly around a tree (which can damage the bark and weaken the tree), the strap spreads the load evenly, minimising harm to the tree while providing a safe and secure anchor for vehicle recovery.
Yes. Unlike standard tree trunk protectors that are only designed for anchoring, the OPENROAD tree trunk protector is built with high load rating, so it can also be used as a straight recovery strap. This means it not only protects the tree when winching but also doubles as a reliable strap for vehicle recovery in off-road situations. (Note: it is not a kinetic/snatch strap and should not be used for high-speed recoveries.)
1.Wrap the strap around the base of a strong tree, keeping it low and close to the ground.
2.Feed both looped ends of the strap into a bow shackle or soft shackle.
3.Attach your winch hook to the shackle.
4.Slowly tension the winch line until the strap is secure, making sure it sits flat against the tree without twists.
5.Always use a winch dampener on the line for added safety.
This method protects the tree by spreading the load across the strap while providing a safe, solid anchor point for recovery.
Choose the right tree – Only use strong, healthy trees with a wide trunk as anchor points.
Wrap low and flat – Position the strap near the base of the tree, keeping it flat and untwisted.
Use rated shackles – Always connect with properly rated bow shackles or soft shackles.
Avoid kinetic use unless specified – Tree trunk protectors are generally for static pulls; only use for snatch recovery if the strap is rated for it.
Stay clear during operation – Keep people well away from the recovery line in case of failure.
Use a dampener – Place a winch blanket or recovery dampener over the winch line to reduce recoil risk.
The OPENROAD tree trunk protector has a breaking strength of 18,000 kg, making it one of the strongest options available for serious 4WD recovery. This heavy-duty rating ensures maximum safety and reliability when anchoring to trees or performing straight-line recoveries with a winch. Always stay within the rated capacity and avoid misuse to maintain safe operation.